Banner
Home > News > Content

What Are The Configurations Of The Aluminum Melting Furnace?

Feb 25, 2019

The melting furnace of aluminum alloy is a new type of high-efficiency energy-saving melting aluminum furnace developed according to the aluminum smelting process. It is mainly used for the melting and heat preservation of aluminum ingots, and it can well satisfy the process of aluminum smelting. The furnace is composed of a melting furnace, a crucible, a heating element, a furnace lid lifting mechanism, and an electric appliance automatic temperature control system. The furnace shell is welded into a cylindrical shape from a section steel and a steel plate. In the lower part of the front end of the furnace body, there is a hole for the slag to form a leak due to corrosion, oxidation, and the molten metal in the crucible can flow out of the furnace through the hole, so that the furnace of the working chamber is not damaged.

The melting furnace of aluminum alloy is a new type of high-efficiency energy-saving melting aluminum furnace developed according to the aluminum smelting process. It is mainly used for the melting and heat preservation of aluminum ingots, and it can well satisfy the process of aluminum smelting.

The furnace is composed of a melting furnace, a crucible, a heating element, a furnace lid lifting mechanism, and an electric appliance automatic temperature control system. The furnace shell is welded into a cylindrical shape from a section steel and a steel plate. In the lower part of the front end of the furnace body, there is a hole for the slag to form a leak due to corrosion and oxidation, so that the molten metal in the crucible can flow out of the furnace through the hole, so that the furnace of the working chamber is not damaged.

I won't go into the aluminum melting furnace here. I believe everyone is very familiar with it. Let's talk about the configuration knowledge in this area.

Such as: how to melt the 6063 alloy, which is also very important, the domestic furnace is now in the 40s level, but also in the 1990s, the worst manufacturers use the original 坩 boiler. There are coal-burning, oil-burning, gas-burning and electrically heated melting furnaces. Some stoves have chimneys, and some have no chimneys. Generally used are square furnaces (rectangular furnaces), advanced ones are circular furnaces, and some circular furnaces can tilt down aluminum water. On the tonnage of one ton, two tons, five tons, ten tons, twenty five tons and fifty tons of molten aluminum furnace. More advanced, add a static furnace under the aluminum melting furnace, static furnace is important to prepare 6063 alloy, in which the slag can be degassed, static, and then cast aluminum rod for extrusion. The quality of the alloys formulated in the original coal-fired furnaces and modern round furnaces is absolutely different. In general, the furnace should have a chimney regardless of the fuel burned. Most of the waste gas generated from the combustion of the fuel can be discharged from the chimney. If no exhaust pipe waste gas is completely melted in the aluminum water, the aluminum rod for extrusion is cast, and there is a serious slag bubble inside, which is one of the reasons for the poor quality of the aluminum material, which is one of the reasons for the low price of aluminum.


Back